Bridgeport Boss 1-7 CNC Upgrade Kit (#15025) includes:
– ALLIN1DC (Motion Control, PLC, DC Drives) True Closed Loop CNC Control
– Qty. 3, 29 in-lb DC servo motors NEMA 42 with plug-and-play 16' cables
– Centroid DC power supply "Capacitor + Bridge Combo" ( use of a transformer is no longer required for DC servo power creation)
– Boss PLC program
– Made in USA

(Note: Bridgeport Boss 1-7 machines were originally equipped with stepper motors. If you wish to retain the stepper motors see our Acorn CNC control board.)

Designed for Boss 1-7 equipped mills, and any Knee mill or Bed mill that needs new DC servos on all three axes. This retrofit kit includes 3 brand new Made in USA servomotors with 2000 line (8000 ppr) encoders factory installed. The end result is smooth, continuous 3-axis motion. And up to 8x the accuracy of the old controller. You’ll be able to perform CNC operations that simply weren't possible with the old control! See this PDF for more info.

 
Depending on our current order volume, it may take us 5 days of processing before we are able to ship your order.
 

Reuse existing DC servo motors by upgrading the encoder and installing this 2 Axis Allin1DC CNC Controller Kit (#15027)

Kit includes:
– ALLIN1DC (Motion Control, PLC, DC Drives) True Closed Loop CNC Control
– Two servo motor encoders with pig tail connectors
– Two 16' Servo motor Power and Encoder cables
(plug and play with Allin1DC and Encoders)
– Centroid DC power supply "Capacitor + Bridge Combo" (reuse existing step down transformer)
– Made in USA

Front or back mount tooling, gang tooling, CSS, Threading, CNC Turret Compatible, Spindle Encoder input, Dual MPG handwheel inputs.

 
Depending on our current order volume, it may take us 5 days of processing before we are able to ship your order.
 

2 Axis Controller Kit with new DC Motors (#15028,15029,15030,15381) includes:
– ALLIN1DC (Motion Control, PLC, DC Drives) #14999 True Closed Loop CNC Control
– DC servo motors in popular combinations, with 16' cables installed.
  - 16 in-lb on X & 29 in-lb on Z
  - 16 in-lb on X & 40 in-lb on Z
  - 29 in-lb on X & 29 in-lb on Z
  - 29 in-lb on X & 40 in-lb on Z
– Centroid DC power supply "Capacitor + Bridge Combo" (use of a transformer is no longer required for DC servo power creation)
– Made in USA

Front or back mount tooling, gang tooling, CSS, Threading, CNC Turret Compatible, Spindle Encoder input, Dual MPG handwheel inputs.

 
Depending on our current order volume, it may take us 5 days of processing before we are able to ship your order.
 

Allin1DC CNC Controller Upgrade Kit for
Bridgeport, Anilam, Dynapath and Others (#15026) includes:
– ALLIN1DC CNC controller kit (#14999)
– Qty. 3 2000 Line (8000 ppr) Encoders (specify motor encoder shaft diameter)
– Qty. 3 Pre-Wired 16' Servo Power and Encoder Cables.
(plug and play with new encoders)
– Capacitor and Bridge combo DC power supply with mounting brackets
– Pre configured PLC programs for common machine tools
– Made in USA

Allin1DC CNC controller upgrade kit for Bridgeport, Anilam, Dynapath and others when reusing existing servo motors and upgrading to new encoders!

Allin1DC CNC control kit for Bridgeport Boss 8-12 / V2XT / V2ES / EZ Trak, Heidenhain TNC 145 Interact I or II , knee mills and many other machine tools with Anilam, Dynapath and other old CNC controls that used DC servo axis motors.
 
 
Click here to view the Allin1DC Visual Price Guide!
 
 
This kit is intended for reuse of existing servomotors replacing the stock low-resolution encoders with new 2000 line (8000 ppr) units which dramatically increases the performance, and accuracy of the machine tool. See this PDF for more info.

 
Depending on our current order volume, it may take us 5 days of processing before we are able to ship your order.
 

• Centroid M400S "M-Function" Stock System (#15218) includes:
  • - M400 cnc console with 4‘ conduit.
  • - Centroid Allin1DC CNC Control Board
  • - Qty (3) 29 in-lb DC servos, prewired ready to run with 14’ direct wire cables
  • - Spindle Fwd/Rev Contactors prewired with 15’ hookup cable (220 vac)
  • - Flood Pump Contactor prewired with 12’ cable
  • - Mister Solenoid control realy with 12’ cable
  • - Lube pump control with 12’ cable
  • - Hi-Lo Spindle Range input with 12’ cable
  • - X, Y, Z Limit switch cables, single 12’ cable for two switches per axis
  • - Console arm (2.5’) with brackets for both console and machine ends
  • - Dual voltage input. 110 vac single phase and 220 vac 3 phase for spindle and flood
  • - CNC12 Mill Pro Software License

In-Stock, Ready-To-Run CNC Control Systems for immediate shipment at a great price.

When you need a CNC control fast, this is the way to go.
Stock systems are complete ready-to-run CNC controls with servo motor, and accessory cables prewired ready for installation on the machine tool.

Note: Centroid will not modify a stock system in any way. It is boxed up on the shelf ready for shipment. No changes, however you are welcome to modify the stock system to suit your particular needs if necessary.

Currently ships via FedEx Freight, cost of shipping varies state to state so a Shipping Deposit will be added at checkout, you will be refunded the difference once shipment is complete. Currently only available to ship Contiguous US States via website. Call or Email us today for more information and shipping outside of Contiguous US States

• Centroid M400S "S-Function" Stock System (#15219) includes:
  • - M400 cnc console with 4‘ conduit.
  • - Qty (3) 29 in-lb DC servos, prewired ready to run with 14’ direct wire cables
  • - Spindle Power and Fan 15’ hook up cables
  • - Power and Control Cables to Spindle Inverter, 10’
  • - Flood Pump Contactor prewired with 12’ hookup cable
  • - Mister Solenoid control relay with 12’ cable
  • - Lube pump control with 12’ cable
  • - Hi-Lo Spindle Range input with 12’ cable
  • - X,Y, Z Limit switch cables, single 12 ‘ cable for two switches per axis
  • - Console arm (2.5’) with brackets for both console and machine ends
  • - Dual voltage input. 110 vac single phase and 220 vac 3 phase for spindle and flood
  • - CNC12 Mill Pro Software License

M15 "S" Cabinet Drawing

In-Stock, Ready-To-Run CNC Control Systems for immediate shipment at a great price.

When you need a CNC control fast, this is the way to go.
Stock systems are complete ready-to-run CNC controls with servo motor, and accessory cables prewired ready for installation on the machine tool.

Note: Centroid will not modify a stock system in any way. It is boxed up on the shelf ready for shipment. No changes, however you are welcome to modify the stock system to suit your particular needs if necessary.

Currently ships via FedEx Freight, cost of shipping varies state to state so a Shipping Deposit will be added at checkout, you will be refunded the difference once shipment is complete. Currently only available to ship Contiguous US States via website. Call or Email us today for more information and shipping outside of Contiguous US States