ATC Software License for Oak/Allin1DC/Hickory/MPU11 (#15006):
This software license is required for an Oak/Allin1DC/Hickory/MPU11 system that will be configured for an Automatic Tool Changer.
This purchase includes 1 Hour of tech support time for customization and support. Complex ATC setups may require additional support time.
A Pro License or above is required for full ATC functionality.

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Lathe Pro to Lathe Ultimate. Please see the Acorn FAQ for more information.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

Please be sure that you are purchasing the correct Software Version for your Acorn Install. Mill Licenses only work with Mill Installs, and will not work for Lathe, Router, or Plasma.

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Lathe Pro to Lathe Ultimate.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Lathe Pro to Lathe Ultimate.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Lathe Pro to Lathe Ultimate.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Mill Pro to Mill Ultimate. Please see the Acorn FAQ for more information.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

Please be sure that you are purchasing the correct Software Version for your Acorn Install. Mill Licenses only work with Mill Installs, and will not work for Lathe, Router, or Plasma.

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Mill Pro to Mill Ultimate.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Mill Pro to Mill Ultimate or Ultimate Plus.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Mill Pro to Mill Ultimate.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Plasma Pro to Plasma Ultimate. Please see the Acorn FAQ for more information.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

Please be sure that you are purchasing the correct Software Version for your Acorn Install. Plasma Licenses only work with Plasma Installs, and will not work for Mill, Lathe, or Router.

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Plasma Pro to Plasma Ultimate.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

Please be sure that you are purchasing the correct Software Version for your AcornSix Install. Plasma Licenses only work with Plasma Installs, and will not work for Mill, Lathe, or Router.

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Plasma Pro to Plasma Ultimate.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Router Pro to Router Ultimate. Please see the Acorn FAQ for more information.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

Please be sure that you are purchasing the correct Software Version for your Acorn Install. Mill Licenses only work with Mill Installs, and will not work for Lathe, Router, or Plasma.

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Router Pro to Router Ultimate.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Router Pro to Router Ultimate.

Please see the detailed table below describing the differences between Pro and Ultimate software levels

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Pro or Ultimate to Ultimate Plus.

Includes all the features of Ultimate, PLUS 6 axis simultaneous interpolated motion CNC software.

AcornSix can command all 6 axis drivers with or without this option. This option allows: Simultaneous Coordinated Interpolated motion of individual axes involving 5 or more axes which is a regulated technology by the US government. (If you are outside the US we will provide and ask you to sign two documents, a letter of assurance and a letter of certification for our records).
 
 
Most users do not require this feature. Don't confuse True interpolated 5+ axis motion with simply having 5 or more drive ports on the CNC control board that all can command and move 5 or more axes. AcornSix without this 6 axis simultaneous software is considered a 4+2 system. Which is: Fully interpolated motion for ANY four axis in ANY combination at ANY given time. For instance XYZW, XWAB, ABCW, ZWAB, XYAB, ZYAB, etc..
 
 

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

• Centroid's CNC12 software ownership is a buy-once, use-forever license model. With Centroid CNC12 you purchase a perpetual software license. This means you own that version of the software indefinitely, with no recurring maintenance fees or subscriptions required to keep using it. The license is tied to a single CNC controller main board, it can be installed on as many computers/cnc12 installations as needed and does not require annual service contracts, recurring subscriptions, internet connections/validations or check-ins on the CNC control.
• License Version Upgrades will be provided free of charge for major versions released within 12 months of your original CNC main board (Acorn, AcornSix, Hickory, Allin1DC, Oak, MPU11) purchase.
• Licenses purchased within 30 days of a major version release are eligible for a free Version Upgrade to the next version.
• More information about the new CNC12 License Version Schema can be found here.

Once a software license has been assigned to a control, it becomes non-transferable with the exception of RMAs. After a software license has been generated it is non-refundable and can not be exchanged for another version of Software unless you are upgrading from Pro or Ultimate to Ultimate Plus.

Includes all the features of Ultimate, PLUS 6 axis simultaneous interpolated motion CNC software.

Allin1DC can command up to 6 axis drivers, Hickory and Oak can command up to 8 axis drivers, with or without this option. This option allows: Simultaneous Coordinated Interpolated motion of individual axes involving 5 or more axes which is a regulated technology by the US government. (If you are outside the US we will provide and ask you to sign two documents, a letter of assurance and a letter of certification for our records).

Most users do not require this feature. Don't confuse True interpolated 5+ axis motion with simply having 5 or more drive ports on the CNC control board that all can command and move 5 or more axes. Allin1DC, Hickory, and Oak without this 6 axis simultaneous software is considered a 4+2 system. Which is: Fully interpolated motion for ANY four axis in ANY combination at ANY given time. For instance XYZW, XWAB, ABCW, ZWAB, XYAB, ZYAB, etc..
 
 

The Pro and Ultimate Software is not subscription based, once you purchase the License it is yours for life. Currently we are on CNC12, in the future we may release “CNC13” for instance and there may be a cost to upgrade the software at that point, but you would never lose access to what you already have.

See the "Features" tab for a detailed comparison of Free, Pro, and Ultimate Software Levels

Purchase a Centroid CNC software Pro or Ultimate License for CNC12 v5.xx at a special one time discounted rate of $299  for Oak, MPU11 or Allin1DC users upgrading from from Centroid CNC software older than v4.16

This special discounted CNC software license is for Allin1DC, Oak, and MPU11 Centroid Owners that wish to upgrade from a CNC11/CNC12 system currently using Centroid CNC software revision v4.16 or earlier to the newest CNC12 v5.XX release that uses the Pro,Ultimate and Ultimate + License file structure. This allows legacy users to upgrade to the latest version of CNC12 for a one time fee. Centroid will provide at this discounted rate a Pro, Ultimate or Ultimate + License file based on the current CNC software features available. Send us a fresh report.zip (use "create report" in the utility menu) and we will send you back a fresh new License file to use with CNC12 v5.xx +

Note: VCP and WMPG-4/WMPG-6 features require a PLC update to work correctly, please call or email us at +1-814-353-9290 or diysales@centroidcnc.com for more information.

• Centroid Offline INTERCON (#15100) Features:
  • - For those that do not want to use or learn a CAD/CAM system to make CNC parts.
  • - Program parts in the comfort of your office.
  • - Program while the machine is running a job.
  • - Easy part program transfer from your PC to the control via LAN or USB.
  • - True G-code back plot graphics, see exactly what the machine toolpath will be.
  • - Use on the same PC as your CAD system.
  • - A USB Keylock allows user to install software on as many computers as they want.
  • - Offline programming USB keylock is shipped the next business day.
  • - Works with Windows 7/8/10/11*
  • - Manual with tutorial examples see Mill Chapter 10, Lathe Chapter 7
  • - Download offline conversational programming software here

The offline programming software runs without USB keylock but limited to 20 lines of Intercon. Plug in the USB keylock for unlimited conversational programming operation.

Installation instructions here and a web page with more information about Offline INTERCON here.

Whether you have a part sketched out on the back of a napkin or a professionally created CAD drawing you'll be able to quickly create part programs with INTERCON, CENTROID's part programming software. With INTERCON you can create part programs by simply entering the dimensions from your print OR by using a DXF file (CAD drawing). Mill INTERCON is intended for Mill/Router use. Lathe INTERCON is intended for Lathe use.

• For those that do not want to use or learn a CAD/CAM system to make CNC parts
• Program parts right at the machine or at your desktop PC*
• -or- Input your dimensions directly from your print
• INTERCON combines conversational with CAD
• Very user friendly with a quick learning curve
• Powerful features usually only found on CAM systems
• Creates Toolpath G codes automatically
• Shows your work as you go. See a Toolpath Graph at any point
• Help screens for all the common milling/turning cycles
• Automatic pocket spiral cleanout creates roughing and finish passes automatically
• Fill in the blank Canned Cycles
• Teach Mode, Geometry Math Help, Polar Coordinates

Most shops find Intercon is often the fastest way to make a part!

• Centroid Plasma Offline INTERCON (#15100) Features:
  • - For those that do not want to use or learn a CAD/CAM system to make CNC parts.
  • - Program parts in the comfort of your office.
  • - Program while the machine is running a job.
  • - Easy part program transfer from your PC to the control via LAN or USB.
  • - True G-code backplot graphics, see exactly what the machine toolpath will be.
  • - Use on the same PC as your CAD system.
  • - A USB Keylock allows user to install software on as many computers as they want.
  • - Offline programming USB keylock is shipped the next business day.
  • - Works with Windows 7/8/10/11*
  • - Download Plasma offline conversational programming software here

The offline programming software runs without USB keylock but limited to 20 lines of Intercon. Plug in the USB keylock for unlimited conversational programming operation.

Offline Intercon Plasma Manual can be found starting on Page 90 of the Plasma Users Manual

Whether you have a part sketched out on the back of a napkin or a professionally created CAD drawing you'll be able to quickly create part programs with INTERCON, CENTROID's part programming software. With INTERCON you can create part programs by simply entering the dimensions from your print OR by using a DXF file (CAD drawing). Plasma INTERCON is intended for Plasma use.

• For those that do not want to use or learn a CAD/CAM system to make CNC parts
• Program parts right at the machine or at your desktop PC*
• -or- Input your dimensions directly from your print
• INTERCON combines conversational with CAD
• Very user friendly with a quick learning curve
• Powerful features usually only found on CAM systems
• Creates Toolpath G codes automatically
• Shows your work as you go. See a Toolpath Graph at any point
• Help screens for all the common milling/turning cycles
• Automatic pocket spiral cleanout creates roughing and finish passes automatically
• Fill in the blank Canned Cycles
• Teach Mode, Geometry Math Help, Polar Coordinates

Most shops find Intercon is often the fastest way to make a part!